咨询热线

13905418708

仿石路沿石也称谓：仿大理石路沿石、路边石、路缘石等。是采用湿法成型工艺进行胚体成型，经过一段时间养护，胚体强度达到一定要求后经过切割、打磨、抛光或抛丸处理。

Imitation stone curbstones are also known as: imitation marble curbstones, curbstones, curbstones, etc. It is a wet forming process used for embryo formation. After a period of curing and reaching a certain strength requirement, the embryo is cut, polished, polished or shot blasted.

仿石路沿石、路边石、界石具体成型工艺如下 ：

The specific molding process for imitation stone curbstones, roadside stones, and boundary stones is as follows:

一、仿石路沿石（PC路沿石）胚体成型的配料过程：

1、 The batching process for the formation of the embryo of the imitation stone roadside stone (PC roadside stone):

仿石路沿石主要原材料为砂、细石、高标号水泥及无机氧化铁颜料、添加剂、水等。根据生产的仿石产品的花色及强度要求的不同，配方有较大的区别，如何生产出优质的、让客户满意的仿石产品需要生产企业进行反复的配方试验。

The main raw materials for imitation stone curbstones are sand, fine stones, high-grade cement, inorganic iron oxide pigments, additives, water, etc. According to the different color and strength requirements of the produced imitation stone products, there are significant differences in the formula. How to produce high-quality and customer satisfied imitation stone products requires the production enterprise to conduct repeated formula tests.

二、仿石路沿石（PC路沿石）胚体成型过程：

2、 Imitation stone roadside stone (PC roadside stone) embryo forming process:

仿石产品一般采用湿法成型工艺。

Imitation stone products generally use wet molding technology.

这里讲的湿法是和传统上透水砖生产所用的干硬性产品生产工艺相对应的，透水砖产品生产时，生产所需原材料搅拌及成型过程中材料中的含水率极低，所以生产出的产品称为干硬性混凝土制品。

The wet process mentioned here corresponds to the traditional dry and hard product production process used in the production of permeable bricks. During the production of permeable brick products, the moisture content of the raw materials required for mixing and forming is extremely low, so the products produced are called dry and hard concrete products.

湿法生产是在搅拌、成型过程中所有材料的含水率接近于传统的混凝土工艺。

Wet production is a process in which the moisture content of all materials during mixing and molding is close to that of traditional concrete processes.

在成型过程中采用压滤工艺将材料中的水份挤出，成为一种含水率极低的、近似于干硬性产品的制品。

During the molding process, the water in the material is squeezed out using pressure filtration technology, becoming a product with extremely low moisture content that is similar to a dry and hard product.

三、仿石路沿石（PC路沿石）胚体养护：

3、 Imitation stone road edge stone (PC road edge stone) embryo maintenance:

成型后的产品要放在养护窑内根据工艺要求进行充分的养护，这对后期的质量有直接的关系。

The formed product should be placed in a curing kiln for sufficient curing according to the process requirements, which is directly related to the quality of the later stage.

四、仿石路沿石（PC路沿石）胚体加工流程：

4、 Process flow of imitation stone roadside stone (PC roadside stone) embryo:

养护结束后的产品，当强度达到一定要求后进行到后期的加工过程中，加工分为粗加工、细加工及上光等几个流程，根据对产品的不同要求来制定加工流程，各加工企业可根据自家不同的要求制定各自需要的加工流程。但粗加工流程是不可缺少的。

After the maintenance of the product, when the strength reaches a certain requirement, the processing is divided into several processes such as rough processing, fine processing, and polishing. The processing flow is formulated according to different requirements for the product, and each processing enterprise can develop their own processing flow according to their different requirements. But the rough machining process is indispensable.

五、码垛流程：

5、 Stacking process:

这是生产过程中**后的一个流程。生产出来的产品重量一般在几十公斤以上，且产品经过粗、精加工后，外观品质已不同于一般的混凝土，需要在交付给客户前，对产品外观进行一定的保护，减少入库、运输及交付过程中对产品外观造成不必要的破坏。

This is a post production process. The weight of the produced products is generally over tens of kilograms, and after rough and fine processing, the appearance quality of the products is different from that of ordinary concrete. Before delivery to the customer, it is necessary to protect the appearance of the products to reduce unnecessary damage to the appearance during storage, transportation, and delivery.

本文由山东仿石路沿石提供帮助，更多的相关内容请点击： //www.quanyouyou.com 希望本文能够为您带来帮助，感谢您的阅读！

This article is provided by Shandong Fangshi Road Edge Stone for assistance. For more related content, please click: //www.quanyouyou.com I hope this article can be helpful to you. Thank you for reading!