山东路沿石的用途使用讲解
路沿石虽然是一种天然的石材，但是，它后期毕竟是经过加工才投入运用的.
Although curbstone is a natural stone, it was processed and put into use later on
使用路沿石石材制作的薄板来进行园林地面或是屋面瓦的铺设，可以给人一种古朴自然的感觉，然后如果在室内也装饰一些墙面装饰的话，就会给人一种返璞归真的效果，现在很多仿古建筑中都用到了路沿石,但是路沿石板石材表面不能打磨，也不可以承受重的东西，所以大家要小心维护。
The use of thin sheets made of curbstone for laying garden floors or roof tiles can give a sense of simplicity and naturalness. If some wall decorations are also used indoors, it will give people a return to nature effect. Nowadays, many antique buildings use curbstone, but the surface of the curbstone cannot be polished or can't bear heavy objects, so everyone should be careful to maintain it.
1.人员组织。为了保证石牌楼的百年大计，应该组织富有石牌楼施工经验、工作认真负责的施工队伍。其中包括：经验丰富的选料人员、耐心细致的放线人员，技术过硬的雕刻人员，胆大稳妥的安装人员。各部人员都要按照设计要求，有条不紊的做好自己所负责的各项工作。
1. Personnel organization. In order to ensure the long-term plan of the stone archway, a construction team with rich experience in stone archway construction and serious and responsible work should be organized. This includes experienced material selection personnel, patient and meticulous setting out personnel, skilled carving personnel, and bold and reliable installation personnel. All personnel in each department should follow the design requirements and do their respective tasks in an orderly manner.
2.选择石料。选择石料应该一“量”二“看”三“听”四“杵”。一“量”：选择石料要对所选的石料进行丈量，用弯尺放线二“看”：仔细查看石料的断开面，要选择同一个山场，色泽比较一致的石料，否则会出现较大色差三“听”：用手锤敲砸石料，如发声梆子清脆，说明石料的整体性能好。四“杵”：用钎子杵一杵石料的凸出部位，进一步查看石料的坚实密度。
2. Select the stone material. The selection of stone materials should include "measuring", "looking", "listening", and "pestle". 1. "Measurement": When selecting stones, measure the selected stones and use a curved ruler to set the line. 2. Four "pestles": Use a drill rod to pestle the protruding part of the stone material, and further check the solid density of the stone material.
3.放线制样。成品构件要分类编号，分类存放。
3. Setting out and preparing samples. Finished components should be classified, numbered, and stored in categories.
4.制作构件。
4. Make components.
5.构件包装。将构件平放在托板上用塑料薄膜包好，然后用粗铁丝打摽拴牢，打摽数量根据构件的长度而定，同时在打摽铁丝与构件接触之处垫上一块废轮胎，以防伤到构件。有雕饰的大型构件用塑料薄膜包好使用木条箱包装，包装时要固定稳妥，放平挤实。
5. Component packaging. Place the component flat on the support plate and wrap it with plastic film, then use thick iron wire to tie it tightly. The number of ties depends on the length of the component. At the same time, place a waste tire at the contact point between the tie wire and the component to prevent damage to the component. Large components with carved decorations should be wrapped in plastic film and packaged in wooden crates. The packaging should be securely fixed and placed flat and compacted.
下一篇：植草砖比较适合用在哪些地方？
相关产品
相关新闻
资讯推荐Information
联系我们Information
- 济南龙岳建材有限公司
- 电话：13905418708
- 地址：济南章丘区枣园街道吉祥村工业园
