怎样选择合适的电缆沟盖板？
1、强度比较高，承载能力好具备一定的承载能力和强度是板材基本的要求，根据不同的运用场所，来选择板材的材料。很明显，传统的塑料和木质材料是不能够满足电缆沟盖板的要求的。以往的盖板都是水泥材料的，现在出现了复合材料以及玻璃钢等。
1. High strength, good load-bearing capacity, and having a certain load-bearing capacity and strength are the basic requirements of the board. The material of the board is selected according to different application locations. It is obvious that traditional plastic and wooden materials cannot meet the requirements of cable trench covers. Previously, the cover plates were made of cement materials, but now composite materials and fiberglass have emerged.
2、恬静功用好，如果判断盖板恬静功用怎么样，具体要看它的韧性、导电以及导热等方面。石质的盖板不导电也不导热，但是韧性不大，和金属盖板差不多，特别容易变形。在恬静功用这+方面来讲，玻璃钢盖板是比较好的选择，不仅韧性大，而且也不导电不导热。
2. The quiet function is good. If you judge the quiet function of the cover plate, it depends on its toughness, conductivity, and thermal conductivity. The stone cover plate does not conduct electricity or heat, but its toughness is not high, similar to that of a metal cover plate, and it is particularly prone to deformation. In terms of its tranquil function, fiberglass cover plates are a good choice. They not only have high toughness, but also do not conduct electricity or heat.
3、封闭性强，封锁性是衡量电缆沟盖板质量的重要因素，封锁性只有达到一定的要求，才能够更好地保护电缆，才能不至于损坏电缆。想要产品封闭性强，在制作的过程中，要对承载力、角度、尺寸等进行合理的设计。
3. Strong sealing is an important factor in measuring the quality of cable trench covers. Only when the sealing meets certain requirements can cables be better protected and not damaged. To achieve strong product closure, it is necessary to design the bearing capacity, angle, size, and other factors reasonably during the production process.
安装方法
Installation method
电缆沟盖板按照厚度分为分为：40mm 厚复合材料盖板、50mm 厚复合材料盖板、60mm 厚复合材料盖板、70mm 厚复合材料 盖板、80mm 厚复合材料盖板。
The cable trench cover plate is divided into 40mm thick composite material cover plate, 50mm thick composite material cover plate, 60mm thick composite material cover plate, 70mm thick composite material cover plate, and 80mm thick composite material cover plate according to thickness.
为了确保复合材料盖板的正常使用，应十分注重电缆盖板安装质量,做到尺寸准确、安装坚固、外表清洁美观，根据复合材料盖板的技术标准，定以下安装细则：
In order to ensure the normal use of composite material cover plates, great attention should be paid to the installation quality of cable cover plates, ensuring accurate dimensions, sturdy installation, and clean and beautiful appearance. According to the technical standards of composite material cover plates, the following installation rules are formulated:
1、在做基础前先确定常规盖板尺寸，根据盖板尺寸预留嵌入尺寸。
1. Before making the foundation, determine the regular cover plate size and reserve the embedded size based on the cover plate size.
2、放置电缆盖板的支撑基座须平整、坚固、无残留杂物。
2. The support base for placing the cable cover plate must be flat, sturdy, and free of residual debris.
3、铺装盖板时每块盖板应两人协同铺装，不可单人铺装或先放盖板一端再放另一端。
3. When laying the cover plate, two people should work together to lay each cover plate. It is not allowed to lay the cover plate alone or place one end of the cover plate first and then the other end.
4、铺装完成后应检查电缆盖板是否铺装平整，若未铺装平整应及时处理。
4. After the laying is completed, it is necessary to check whether the cable cover plate is laid flat. If it is not laid flat, it should be dealt with in a timely manner.
5、产品如需切割时应注意安全，盖板内有钢筋骨架，切割时应事先看好钢筋骨架位置，防止人身或设备棉伤。
5. If the product needs to be cut, attention should be paid to safety. There is a steel skeleton inside the cover plate, and the position of the steel skeleton should be checked in advance to prevent personal or equipment damage.
上一篇： 路沿石在铺设施工需要注意
下一篇：透水砖的起源及选择的分类！
相关产品
相关新闻
资讯推荐Information
联系我们Information
- 济南龙岳建材有限公司
- 电话：13905418708
- 地址：济南章丘区枣园街道吉祥村工业园
