抛光砖与釉面砖有哪些区别？
光砖
Smooth brick
抛光砖是由粘土和石材粉末经过压机压制，然后高温烧制再将砖体表面打磨而成的一种光亮砖。砖体不上釉料，正面与背面的色泽一致，烧制完成后再通过抛光工艺处理对表面进行打磨抛光，这样砖体正面光滑明亮，背面则还原砖体本来面目。
Polished bricks are a type of bright brick made by pressing clay and stone powder through a press, then firing at high temperature and polishing the surface of the brick body. The brick body is not glazed, and the color on the front and back is consistent. After firing, the surface is polished and polished through a polishing process. This way, the front of the brick body is smooth and bright, while the back restores its original appearance.
抛光砖坚硬耐磨，光亮洁净，能够让整个空间看起来更加明亮，但由于表面光滑，所以防滑性较差、也易脏。它可细分为渗花型抛光砖、微粉型抛光砖、多管布料抛光砖、微晶石等品类，通常被用于家中客厅、酒店大厅、机场候机室等室内空间。
Polished bricks are hard, wear-resistant, bright, and clean, making the entire space look brighter. However, due to their smooth surface, they have poor slip resistance and are also prone to dirt. It can be subdivided into categories such as porous polished bricks, micro powder polished bricks, multi tube fabric polished bricks, microcrystalline stones, etc. It is commonly used in indoor spaces such as living rooms, hotel lobbies, airport waiting rooms, etc.
玻化砖
Vitrified brick
玻化砖的制作流程与抛光砖类似，是一种强化的抛光砖，它使用的压机要求更好，能够压制更高的密度，同时砖体的烧制温度也更高，经打磨光亮但不使用抛光工艺。相比抛光砖，玻化砖的防水性和防污性更强，但同样也存在不防滑和易脏等缺点。
The production process of vitrified bricks is similar to that of polished bricks. It is a reinforced polished brick that requires a better press and can suppress higher density. At the same time, the firing temperature of the brick body is also higher. After polishing, it is bright but does not use polishing technology. Compared to polished bricks, vitrified bricks have stronger waterproofing and stain resistance, but they also have drawbacks such as non slip resistance and easy dirt.
玻化砖表面光亮平滑，吸水率<0.5%，耐磨耐腐蚀，装饰效果好，被广泛用于各种工程及家庭的地面和墙面。
The surface of vitrified bricks is bright and smooth, with a water absorption rate of less than 0.5%. They are wear-resistant, corrosion-resistant, and have good decorative effects. They are widely used in various engineering and household floors and walls.
釉面砖
Glazed tiles
釉面砖在烧制过程中，表面会加入釉料，砖体与釉料一起经过高温高压烧制而成。砖体分为陶土和瓷土两种，由陶土烧制出来的砖背面呈红色，由瓷土烧制出来的砖背面呈灰白色。相比于陶土，瓷土烧制的砖结构致密，吸水率更低，使用更加广泛。
During the firing process of glazed tiles, glaze is added to the surface, and the tile body and glaze are fired together at high temperature and pressure. Bricks are divided into two types: clay and porcelain clay. The back of bricks fired from clay is red, while the back of bricks fired from porcelain clay is gray white. Compared to pottery clay, bricks made from porcelain clay have a dense structure, lower water absorption, and are more widely used.
上一篇：水利植草砖修路如何做好施工？
下一篇： 路沿石在铺设施工需要注意
相关产品
相关新闻
资讯推荐Information
联系我们Information
- 济南龙岳建材有限公司
- 电话：13905418708
- 地址：济南章丘区枣园街道吉祥村工业园
